Measurement & Machine Technology

IN YOUR SHOP, ON YOUR SITE
WE DO MACHINE TOOL
LASER ALIGNMENT & LASER CALIBRATION



These are the basic Control Parameter Numbers required for Laser Calibration, use these for reference only. Some previous experience will prove helpful in the correct compensation of your machine. I omitted the lathe parameters for clarity.

Fanuc Control Parameter Numbers For Pitch Error Compensation

6m

011 pitch error compensation multiplier
535 X Axis Backlash
536 Y Axis Backlash
537 Z Axis Backlash
1000-1127 x axis compensation values
 

0m

011 pitch error compensation multiplier

535 X Axis Backlash
536 Y Axis Backlash
537 Z Axis Backlash

712 X Pitch Error Compensation Interval
713 Y Pitch Error Compensation Interval
714 Z Pitch Error Compensation Interval

1000 X axis Reference Point
1001-1128 X axis Compensation Values

2000 Y axis Reference Point
2001-2128 Y axis Compensation Values

3000 Z axis Reference Point 
3001-3128 Z axis Compensation Values
 

11m

5420 Reference Point (each axis)
5421 Minus End
5422 Plus End
5423 Compensation Multiplier
5424 Compensation Interval
 

 1851 Backlash Compensation (common to both controls 11m 15m)
 

15m

3620 reference point each axis
3621 minus end each axis
3622 plus end each axis
3623 compensation multiplier
3624 compensation interval

16m

Reference and end (min / max) parameters must not be the same
xxxx plus end each axis
xxxx compensation