Thank you for visiting our site - please take a moment to browse our pages.
The Renishaw QC20-W Ballbar is widely recognized as one of the finest CNC machine tool diagnostic / analysis tools available today; good news is that we are experienced in its operation and use.
Ballbar analysis of your machine tool by our experienced technicians will not only help satisfy your quality documentation but give you the knowledge that your machine can cut good parts. We can perform the analysis and if by chance a problem is found we can use our equipment and experience to adjust and optimize your machine, thereby giving you complete confidence that your machine will produce good parts.
In a very short time Ballbar Analysis of your machine tool by our experienced Alignment Technicians will show you the condition of your machine.
Contact Us – We Stand Ready to Help!
Thermal growth of your ball screw can wreak havoc with your finished part accuracy. Variation of machining accuracy during normal operation can be caused by length deformation or “Thermal Growth” of your ball screw. If you are constantly editing your program, work coordinates or tool offset during your work day; you might just have a ball screw that needs to be re-tensioned. If you have the skilled manpower, I have included a basic procedure to do the ball screw tensioning yourself. If however you do not have available maintenance technicians we would welcome the opportunity to do it and laser calibrate your machine as well.
PLEASE CLICK HERE FOR INSTRUCTIONS.
When you have questions about why your machine is producing scrap you need some basic information about the condition of the machine itself. You can machine a “Master Template” that you can inspect and try to make sense out of what is causing scrap parts. Our “Self-Test” procedure might be a place to get started. When you decide to have the machine aligned and calibrated we would appreciate an opportunity to help.
PLEASE CLICK HERE FOR "Self-Test" INSTRUCTIONS.
Evaluate it, then Dominate it!
Experienced in all aspects of machine tool calibration INCLUDING Rotary Axes! Positioning of your machines rotary axis is critical to part dimensioning. A rotary axis that is inaccurate; producing parts within tolerance is tedious and time consuming. Utilizing our Renishaw XL-80 Laser System combined with our automated Rotary Axis Calibrator “XR20-W” we analyze your rotary axes, evaluate the data and adjust the compensation tables to improve your machine tools rotary accuracy. You can feel confident when you contact us, we are hands-on for over thirty years and have laser calibrated many numerous CNC Machine Tools.
We FIX what we find!
Measurement & MachineTechnology
We excel when it comes to Machine Tool Alignment and Laser Calibration, with 35+ years of hands on experience we can bring your "OLD" machine tool back to life with "LIKE NEW" or better than "NEW" conditions; we perform all the necessary mechanical & electrical / electronic adjustments necessary to optimize your machine tool, regardless of the manufacturer. In extreme cases we will when asked undertake the total geometry rebuild of your machine On-Site; saving you money and more importantly time with minimal disruption to your operation allowing you to overlook the entire project and see for yourself the progress first hand.
We are a small company with large company's resources. Through strategic alliances, affiliations, and just plain cooperation we can deliver whatever your company may need in the area of precision machine tool services.
We are completely portable and bring to your site the necessary men and equipment to complete our task.
If we can measure it; we can fix it!
Please fill in the information requested below with any helpful details and we will make sure to get back to you very soon.
Please call us if an immediate response is needed: 1-313-530-5083